The current Clinical and Rehabilitation Biomechanics research projects use lab space in the Biomechanics Research Building located on the Dodge Campus of the University of Nebraska at Omaha.
Main Gait Lab, BRB 116
This 2,535 ft2 lab features a 3-D motion capture system with 14 high-speed Raptor cameras (Motion Analysis Corporation, Rohnert Park, CA, USA). It is integrated with 3 Gen5 and 5 Optima strain gage force platforms (AMTI, Watertown, MA, USA), and tandem-belt instrumented treadmill (AMTI, Watertown, MA, USA). Each of these is mounted into a concrete subfloor surrounded by a trench for cable management. It is also integrated with a dedicated, but portable, 16 sensor Avanti Trigno Delsys EMG system.
GRAIL Virtual Reality Lab, BRB 103
The VR Lab is a 1,462 ft2 space primarily featuring a Gait Real-time Analysis Interactive Lab (GRAIL) (Motek ForceLink, Amsterdam, Netherlands). It is integrated with 14 high-speed Vero Series cameras, 1 Bonita high-speed high-definition camera (Vicon, Oxford, UK) and an instrumented treadmill (Bertec Corp., Columbus, OH, USA). The treadmill has a split-belt design with separate belts running side by side. Each side is instrumented to measure 6-component ground reaction forces. The virtual environment is created by a front projection system and displayed onto a 180-degree screen and floor. The four projectors, consisting of one Optoma TX774 with 4000 lumens brightness and 2500:1 contrast ratio, three Barco F50s with 5,000 lumens and 5300:1 contrast ratio, all controlled by dedicated computers. Virtual environments can be created in-house using Computer Aided Design (CAD) software or obtained from Motek ForceLink. These environments can also be displayed into an Occulus Rift (Occulus, Menlo Park, CA, USA). The system includes an A/D board and Phidget mechanical relay box (Phidgets Inc, Calgary, Canada). Both can be used to interface the GRAIL with other systems.
Brain Imaging Lab, BRB 129
This 178 ft2 space houses equipment used for noise-sensitive brain imaging and features an airlock and concrete walls for noise cancellation. The ETG-4000 24 Channel Optical Topography System (Hitachi Medical Systems, Tokyo, Japan) is an FDA approved device that enables imaging of the cerebral cortex during sitting or standing using infrared technology. An electroencephalogram (EEG) from Electrical Geodesics Inc. (Eugene, OR, USA) measures the electrical activity in the brain. It uses a net of 130 electrodes wrapped around the scalp and face. The system is integrated with E-Prime software (Psychology Software Tools) and peripheral sensors including: EKG, oximeter, airflow sensors and polygraph. It installed on a wooden desk with casters for electrical isolation and portability. An NDI 3D Investigator motion capture system (Northern Digital Imaging, Ontario, Canada) uses Optotrak Smart Markers for improved tracking and labeling of the markers. The markers are active markers, using specific frequencies of light to improve accuracy. This system has allows simple motion to be tracked in small spaces. An InMotion 2.0 Shoulder Robot (Interactive Motion Technologies, Watertown, MA, USA) allows patients to use a motorized arm to complete tasks and games on a flat-screen display. The arm is actuated allowing force feedback to be communicated to the patient.
Aquatic Therapy Lab, BRB 021
This 246 ft2 lab is dedicated to a HydroWorx 300 (HydroWorx, Middletown, PA, USA) treadmill. It allows subjects to sit, stand, walk or run in a self-contained underwater treadmill. This buoys the subjects providing better rehabilitation. The warm water therapy also provides added comfort.
CAREN Lab, BRB 027
This 1083 ft2 lab will house a Computer Assisted Rehabilitation Environment (CAREN) (Motek ForceLink, Amsterdam, Netherlands). It is similar to the GRAIL Lab but is larger and has more features. It includes a 180-degree screen and front-mounted projectors. It uses ten Vero motion capture cameras (Vicon Motion Systems Ltd, Oxford, UK). The treadmill is a split-belt design with belts on the left and right sides of the treadmill. Each side can measure sixcomponent ground reaction forces. This treadmill is supported on a motion base with six degrees of freedom. The environment is also controlled through Motek ForceLink’s D-Flow software and has several options for third party device integration. It is temporarily housed in BRB 116.
These lab spaces are managed by the Movement Analysis Core (MOVAN).